It provides 25GBase-BX throughput up to 10km over single mode fiber (SMF) using a wavelength of 1270nm-TX/1330nm-RX via an LC simplex connector.

It is designed to transmit and receive optical data links 50 Gb/s bit rate per channel with PAM4 modulation format via up to 2km single mode fiber.

QSFP-DD transceiver for 400G links over multimode fiber

It is designed for use in 100GBASE Ethernet throughput up to 2km over single mode fiber (SMF) with duplex LC connectors.

SC, FC, LC, ST, and various interfaces interchange

SC, FC, LC, ST, and various interfaces interchange

1X2-64, FBT optical splitter is to bundle two or more optical fibers together, and then melt and draw on the taper machine, and monitor the change of the splitting ratio in real time. After the splitting ratio reaches the requirements, the melt-drawing is ended. One end of the fiber is reserved (cut the rest) as the input , and the other end is used as the multi-outputs.

1XN PLC, Planar waveguide optical splitter (PLCSplitter) is an integrated waveguide optical power distribution device based on quartz substrate, with small size, wide operating wavelength range,high reliability and good splitting uniformity. Especially suitable for passive optical networks (EPON, BPON, GPON, etc.) to connect the master and terminal equipment and achieve optical signal splitting.

2XN PLC, Planar waveguide optical splitter (PLCSplitter) is an integrated waveguide optical power distribution device based on quartz substrate, with small size, wide operating wavelength range,high reliability and good splitting uniformity. Especially suitable for passive optical networks (EPON, BPON, GPON, etc.) to connect the master and terminal equipment and achieve optical signal splitting.

Suitable for conventional 1550/1310 two wavelength WDM.

Suitable for conventional GPON, EPON 1550/1310/1490 three wavelength WDM.

Suitable for 10G PON 1270/1310/1490/1550/1577 five-wavelength WDM, compatible with GPON and EPON.

ITU-T standard wavelength